l'key Bolt
                     Welcome To Rachna Fastener
s
Rachna Fasteners started its operation eight years back serving domestic 
Indian market in power and construction sector with increased infrastructure 
and fully equipped testing laboratory step was taken for export .
 Since then there has been no looking back. Over the years Rachna Fasteners 
achieved sale figure of over 90% export sales in year 2012-13 as compare to 
24% of export sales in year 2008-09. After approval of ISO 9001 2008, 
certification for BSEN 15048 part-I & II for CE approved fasteners was 
achieved in year 2010-11. 
Apart from packing heat treatment, special focus has been given to material 
identification traceability starting from mill heat number till final dispatch.
Products
CE Approved Fasteners As Per EN-15048 Part-1 and 2
Hex Head Screws / Bolts
Cup Square Mushroom Head Screws
Crash Barrier Fasteners
Eye Bolts
Other Forged Items
Square Head Bolts & BS 7419 Square Bolts
Nuts
Threaded Bars / U-Bolts / L-Bolts
Washers / Sheet Metal Components
CE Approved Fasteners As P
er EN-15048 Part-1 and 2
CE Approved 
Fasteners As P
er EN-15048 P
art-1 and 2
Backed by the profound experience of the industry, we are engaged in manufacturing and exporting a 
quality range of CE Approved Fasteners. The range offered by us consists of CE Approved Fasteners As Per 
EN-15048 Part-1 And 2. To manufacture these fasteners, our professionals make use of high quality 
material procured from the authentic vendors of the market. All these fasteners are made available in 
various specifications as well as in customized range to match the exact requirements of the patrons. 
Description of the offered product is mentioned as follows:
CE APPROVED FASTENERS AS PER EN-15048 PART-1 AND 2
We are CE BS EN 15048 approved manufacturers for the supply of fasteners to our worthy clients in Europe 
and manufacture as per following parameters.
Bolts/Screws-Bolts/screws as per ISO 4014 and ISO 4017
Nuts-Nuts as per ISO 4032 and ISO 4034
Washers-Washers as per ISO 7089 and ISO 7091
Surface-HDG, Zinc Plated, Self & Black
Hex Head Screws / Bolts
Hex Head Hex Head 
Screws Screws 
& Bolts & Bolts
We are highly competitive in hex type bolts and set screws, We offer hex head screw up 
to M24 in cold forging and up to 52mm in hot forging,
We have various conventional and 4 station bolt master for this purpose,
We offer hex head screws in grade 4.6,4.8,5.6,5.8,6.8,8.8,&10.9
Low carbon & medium carbon steel is used till grade 6.8 and high quality Alloy steel is 
used for 8.8 grades and above, Various Finish offered are self colour Blackened, BZP, 
HDG, Dacromet, Geomet and PTFE coating, Our in-house plating plants ensure maximum 
corrosion resistance with no hazardous material involved, BZP(Cr3 and Cr6) are offered in 
high quality Trivalent Finish both in White and yellow plating.
Cup Square Mushroom Head Screws
Cup Squares or carriage bolts are generally offered 
to DIN 603 standard, However they are some times 
fully threaded as per customer requirements, Even 
head diameter and Neck beneath can be adjusted 
according to customer requirements, Cup squares 
are forged using high speed national bolt formers to 
get accurate and sharp edged neck with proper 
round head,Cup squares are offered starting from 
range M6 to M24,with grades 4.6, 4.8, 5.6, 5.8, 6.8, 
8.8, and 10.9.
 Crash Barrier Fasteners
 Crash Barrier  Crash Barrier
     Fasteners      Fasteners
At Rachna Fasteners we specialize in all types are 
crash barrier fasteners for every type of market, We produce Nib Bolt 
to DIN 607, Round Head Oval neck bolt or Thin hex head screws. These 
fasteners are generally required Hot dip galvanized finish and 
electroplated in some cases, these fasteners like other our products 
are offered in all Mild steel and high tensile range, All assembled parts 
are free moving by hand yet providing best fit for male and female 
threading.
Eye Bolts
 Eye Bolts are    
manufactured 
according to DIN 
444, DIN 580 and 
also according to 
customer 
Eye Bolts requirements, Eye BoltsDifferent types of 
Eye Bolts are 
Manufactured    
Starting  from M6 
TO M64 Eye bolt are 
manufactured both 
in Mild steel and H
igh Tensile Bolt.
Other Forged Items
There are various our 
Forged C
omponents Fasteners 
that are manufactured 
on daily basis as per 
customer special 
requirements.
These are general and 
specific purpose 
fasteners like 
Other Forged Items T head bolts, saddle bolt Other Forged Items
s, cap screw bolts, grub 
screws, roofing screws
. Due to limitation on 
space, concentration 
has been given to very 
general and most 
common fasteners, 
However we guarantee 
best prices and quality 
on any kind of 
cold/hot forged fastener
s
 that you may require.
Square Head Bolts & BS 7419 Square Bolts
Square bolts are manufactured to DIN 480 and 
NFE 27341 (Head oversized)
Square square drop down holding bolts commonly 
known as square squrae bolts are manufactured 
according to BS 7419, These bolts are start from 
range M16 and go up M33, these bolts are 
manufactured using hot and cold forging depending 
up on length and diameter.
Nuts
We have a small 
facility producing nuts, 
nuts are produced 
through cold and hot 
forging facility,
Nuts are available in 
grade 4,5,6,8 and 10, 
Finishes offered are 
Blackened ,BZP , Hot 
dip galvanized,  
Nuts Dacromet , Geomet  and PTFE. These above Nuts
shown nuts are part of 
our most produced 
items, These are 
available in thread 6H, 
over tapped and 6az.
Various Standard 
followed for production 
are 
DIN, ISO, ASTM, BS, NF
.
Threaded Bars / U-Bolts / L-Bolts
Threaded bars are 
manufactured starting 
from Diameter M6 to 
M100 and their 
corresponding Inch 
sizes, Threaded bars are 
available up to 6 meter 
in length, Grades option 
for threaded bars is 4.6, 
4.8, 5.6, 5.8, 6.8, 8.8, 
However currently 8.8 
threaded bars are 
available up to 1 meter 
length only, Threaded 
bars are available in BZP 
and HDG.
U-Bolts / L-Bolts
Tube packaging also 
available.
Washers / Sheet Metal Components
Washers are produced through long 
range of power presses available in 
our own press shop, most common 
standard for our washer production 
are DIN 125 A, NFE Standard, 
DIN 9021, BS 4320 & Champhered 
washers like DIN 125 B are also 
produced in our press shop. 
Washers manufactured are of 
Minimum 100 HV hardness, 
moreover 140 HV washers are also 
manufactured, 
Heavy Tempered Washers are 
readily available in all sizes, Along 
with washers all types of 
sheet metal components like all 
types of bushes, fish plates, hangers 
and all other components possible 
through power and hydraulic 
presses can be manufactured. 
Finishes offered are same as other 
fasteners Self colour, Blackened, 
Hot Dip Galvanized, Geomet, 
Dacromet and PTFE.
Contact Us 
Tel:         Mobile: 
+91-161-5049570 +91- 98140 47000
+91-161-5011690
Email Id: 
Fax: [email protected]
+91-161-4639570
Works & Corporate Office:
RACHNA FASTENERS
Website: No. 671, Industrial Area - B
http://www.rachnafasteners.com Ludhiana - 141003
Punjab ( INDIA )