Toilet Keeps Flushing on Its Own Here’s What’s Going On (and How to Fix It)
                     Toilet Keeps Flushing on Its Own? Here’s 
What’s Going On (and How to Fix It)
Random toilet flushes may be annoying and expensive which causes unnecessary waste of water and 
increase utility bills. This phenomenon is called ghost flushing and is normally caused by small issues such 
as a faulty filler valve, deteriorated flapper or wrong water level adjustments.
In this blog, we are going to immerse ourselves into the common causes of toilet tank leaks and give 
actionable and easy remedies to the problems so that you can fix it yourself.
If these simple fixes don’t fix the problem, we will show you when to call in a professional local plumbing 
repair service to avoid further destruction and costly repairs. Follow these expert tips to keep the toilet 
running efficiently and halt any needlessly wasted water, and reduce your water bill. Well let’s get right 
down to your ghost flushing problem.
 
Top Causes behind Your Toilet's Random Flushes
 
Just a couple of small components are all that separate the water in your tank from where it wants to be. 
They are so much the better, but if they get worn, or change position out of place, then the toilet refill it. 
These are some reasons that may be the cause of a random flushing of your toilet:
Leaking flapper valve - allows water to slowly escape from the tank to the bowl
Wrong setting of water level and over run in pipe
Flapper chain or flush level issues, which interfere with correct sealing
Refill tube shoved down too far in overflow pipe runs continuously
Changes in water pressure that cause the fill valve to suddenly turn on
These problems are what lead to ghost flushing and water waste.
Faulty Fill Valve Issues
If there is a misadjusted or failing fill valve, water runs through it and cycles.
What you hear: Hissing, gurgling or short explosions of refilling.
What you find: The water level is above the marked line, or water trickles into the overflow.
Fast checks: Raise the float softly. If the flow doesn't stop, the valve or float height needs adjusting. Check the 
float arm for a possible rub against the tank wall.
Worn Flapper Valve Leaks
The flapper is the rubber barrier at the bottom of the tank. Leaking occurs when it sets, warps or cracks.
Signs: A silent drip, dye from a tank test appearing in the bowl or a chain that is too tight.
Why it happens: Rubber begins to break down over time from minerals, cleaners, and age.
Simple test: Drop food coloring into the tank, wait 15 minutes; don’t flush. If there’s color in the bowl, it means 
the flapper leaks.
Easy Steps to Fix the Ghost Flushing Issue
First off, turn off the water supply to your toilet, and then flush to empty the tank out - it's a good idea to make 
sure it's fully empty before moving on.
Take a look at the flapper - If it's slimy, twisted, or just plain brittle, it's probably on its way out and times to get 
a new one - make sure you get one that matches your toilet model.

Clean around the seat of the flapper - get all the mineral deposits off so that new flapper can fit snugly and 
do its job properly.
Now have a look at the chain - make sure that new flapper has a bit of room to sit flat and get the job done. A 
quarter inch gap is a good starting point.
Remember to utmost care here - don't let wires or plugs get wet and if you're ever in doubt or see something 
looks broken just stop what you are doing.
 
Need Help Fast? Here’s How to Find Your Plumbing Lifesaver
 
If your toilet’s acting up, don’t wait till it gets worse. With just a quick plumber near me search or a plumbing 
services near me search, you will find the service you are looking for and with an excellent local plumber. 
These pros are available just a call away and could respond fast to save water and avoid future damage.
If you are still struggling after trying yourself bring in experts; they should get your toilet working properly again.
Conclusion
Random flushing often happens because the fill valve's flapper leaks or the water level is too high. The good 
news is that basic testing and cheap parts often get you back on the road in minutes. To keep it clean i would 
dye check once a year and adjust the float to line. Try the measure above today, and if the flushes keep going, 
call up an emergency plumbing service for same-day professional fixing. Softer nights and sweet savings are 
on the way.
             Contact US
•Website:   https://www.rightcliq.in
•Email Us:  [email protected]
•Facebook: https://www.facebook.com/www.Rightcliq.in/
•Instagram: https://www.instagram.com/_rightcliq.in/
• YouTube:   https://www.youtube.com/@RightCliq.in_Official
•Twitter:       https://x.com/_rightcliq
•LinkedIn :   https://www.linkedin.com/company/rightcliq-concepts-pvt-ltd
•Call Us: +91 888 400 9090