TV Doesn't Turn On With Remote but Works after Unplugging  Causes and Fixes
                     TV Doesn't Turn On With Remote but Works after 
Unplugging: Causes and Fixes
When a TV doesn’t power on when you press the remote, but it works once unplugged it is stuck in standby. The 
remote signal could be weak, obstructed or not paired. The software can lock up like a computer and prevent the 
TV from waking up. Maybe the power board is broken and will give you low power but not enough for a screen. 
Unplugging clears the slate, but it isn’t a true fix. If the issue comes back, it can make a turn for worse and you 
might need Professional tv repair service.
In this easy and beginner-friendly excited guide, we are going to take you through what is actually causing the 
problem and here is the best thing that you can actually do to fix the issue on your own so without further ado let’s 
dive in.
 
Quick Checks Before You Unplug Your TV Again
Try the easy stuff before you go reaching for that wall socket. Look at the TV power light. If it is off, make sure the 
power strip switch is turned on, and the plug is seated securely in the wall. If you have any doubts, try another 
outlet.
Now consider the remote control. Focus directly on the TV, clear anything out of the way that might be blocking it 
and ensure no one has enabled child lock or hotel mode in the settings. These features may cover buttons. And 
remember, for safety reasons, never open the TV case. If none of these simple fixes rectify the situation, it might be 
something to do with remote settings, or even a problem with TV software, which we look at in the next sections.
Test the Remote and Power Source First
Replace the batteries with a new set or swap them around to make sure they are in place properly. If the contacts 
appear dirty, clean them with a dry cloth. Step closer to the TV, and try using the power button again. You can also 
aim the remote at a phone camera and push a button; many cameras display infrared light as a dim glow.
Next, try wiggling the power cable for the TV. You want to wiggle it back and forth enough to make sure it's not 
just a loose or dirty plug; there may be some corrosion on the contacts, for example.
Common Causes When the TV Only Starts After Unplugging
If your TV only powers on after you unplug it for a moment, its electronics are probably caught in what we call a 
half-sleep mode. The TV acts like it's in standby, but refuses to wake up all the way when you come back to it.
The remote is sometimes not set up properly. A smart remote can lose the pairing, and the TV won't 
acknowledge it until its power is cycled to clear out its memory.
It's also possible to encounter a software defect in standby. The (relatively) miniature computer inside the TV 
locks up, and when you unplug it, you are basically physically forcing a reboot.
Settings can confuse things, too. Normal startup may be interrupted by HDMI CEC, which allows devices to 
control each other over HDMI, or eco modes that cut power in order to save energy. Tons of brand-specific reset 
methods are on YouTube, but videos there can be fast or not stylistically easy to follow, with different menu 
configurations.
Remote Configuration, Pairing, and Reset Steps
Smart remotes usually require a hard reset. Remove the batteries and next press the Power button on the 
remote while the batteries are removed. Hold the power button for more than 10-15 seconds. Put the batteries 
back in and stand near the TV.
Access the TV settings with the panel buttons and then look for a menu indicating remote, pairing, and 
Bluetooth. Try the pairing or reset option and test again. If these menus seem overwhelming, many a 
prospective set of cable-snipping malcontents enter the search query Rightcliq 
TV repair near me home service, and pay a local tech to walk through their setup, but in person.

Software Glitches, Standby Bugs, and Simple Fixes
Software updates can also resolve a lot of strange power issues.
On your TV, go to settings > system or support — depending on if you are on a Smart TV or running an operator-
tier device — and select software updates.
Experiment with disabling quick start or fast boot features that keep the TV in a somewhat-light sleep state to 
enable faster turn-on. If you have an option for a soft reset or restart in the menu, run that instead of yanking the 
plug every time.
When to Call a Technician Instead of Guessing
Some signs say that you should stop testing on your own. If the power light blinks in a certain pattern, the TV 
instantly makes popping sounds, you smell smoke or burning, or black is on the screen even when you hear sound, 
call a professional.
Components on the inside, such as the power board or main board, could be dying. An LCD TV repair technician 
has fabricated tools and safety equipment that most homeowners lack. There are also many who bring stubborn 
sets to an LCD screen repair shop every time startup problems reappear. A call for this kind of issue could set 
you back 1000 to 1500, which is cheaper than guessing, only to make the situation worse.
 
The bottom line:
When your TV is not responding to the remote, go back to basics. Test batteries, power cords and basic settings. 
Then do remote pairing and software reset steps so that you don't have to unplug the TV every night. The problem 
is that once warning signs start creeping in or if the fix never lasts, the problem may spiral downhill. Keeping the 
manual nearby and perhaps keeping a clear YouTube guide for your model as well, in case you need it, may help. 
And when you're ready to hand it off, just hit up your friendly tv repair service and let them do their thing.
             Contact US
•Website: https://www.rightcliq.in
•Email Us: [email protected]
•Facebook:   https://www.facebook.com/www.Rightcliq.in/
•Instagram:   https://www.instagram.com/_rightcliq.in/
• YouTube:  https://www.youtube.com/@RightCliq.in_Official
•Twitter:  https://x.com/_rightcliq
•LinkedIn : https://www.linkedin.com/company/rightcliq-concepts-pvt-ltd
•Call Us:+91 888 400 9090