Trubore_uPVC_Plumbing_Systems (1uPVC Pipes & Fittings Manufacturer in India | Trubore)
                     TRUBORE PIPES
uPVC Plumbing
Systems Lead-free
Safe for drinking water
Your TRU choice for clean water
Lead-free, corrosion-resistant pipes and fittings for safe, durable water
supply in commercial, residential and industrial projects, from a proud 15-250 mm
division of Prince Pipes and Fittings Ltd with over four decades of expertise. Pipe size range
Sch 40 & 80
Pipes per ASTM D-1785
Toll Free: 1800 266 8222     |     truborepipes.com 1 / 4
Why uPVC for Plumbing? TRUBORE
Key advantages of Trubore uPVC pipes and fittings
Lead-free Corrosion resistant High impact resistance
1 2 3
Safe material for clean drinking water Constant bore diameter keeps flow consistent Performs well even at lower temperatures
over its life
Fast, easy installation Lightweight but strong Self-extinguishing
4 5 6
Solvent-weld jointing saves time on site Easy to handle and transport Does not support combustion
APPLICATIONS
Commercial Residential Industrial
Trubore Pipes  |  uPVC Plumbing Systems  |  truborepipes.com 2 / 4
Product Range & Specifications TRUBORE
Pipes and fittings built to ASTM standards, with clear pressure ratings
FITTINGS RANGE PIPE WORKING PRESSURE AT 23°C (kg/cm2)
Couplers, elbows, tees, reducers, unions, ball valves, flanges, tank
connectors, bends and brass-insert threaded adaptors, elbows and tees.
Size OD (mm) Sch 40 Sch 80
15 mm (1/2") 21.34 42.20 59.75
STANDARDS AT A GLANCE
25 mm (1") 33.40 31.60 44.25
Pipes, Sch 40 & 80
Plain ended, per ASTM D-1785
50 mm (2") 60.32 19.65 28.10
Fittings, Sch 80
Per ASTM D-2467 100 mm (4") 114.30 15.50 22.50
Fittings, Sch 40
Per ASTM D-2466 150 mm (6") 168.28 12.60 19.65
Metal-insert fittings 250 mm (10") 273.00 9.90 16.20
Rated at 15 kg/cm2
Pipe sizes Solvent-weld pipes. Ratings fall at higher temperatures, so apply the derating factor.
15 to 250 mm (1/2 to 10 inch)
Threaded joints
Rated at 50% of listed working pressure
Trubore Pipes  |  uPVC Plumbing Systems  |  truborepipes.com 3 / 4
Installing uPVC the Right Way TRUBORE
Best practices for a leak-free, long-lasting system
Design & Handling Jointing & Installation Testing
Allow for expansion and contraction of Use only uPVC solvent cement; never Pressure-test with water only, never air
the piping gelled cement or gas
Apply a pressure derating factor at Cut square, remove burrs, quarter-turn Confirm all joints are fully cured first
higher temperatures while inserting
Open air-relief valves at high points
Store in a covered area on level, flat Cure 24 hours (dry) or 48 hours
ground (humid) Limit initial fill velocity to 0.3 m/s
Never drop, drag or throw pipes Use PTFE tape on threads; do not
over-tighten
Talk to Trubore Toll Free 1800 266 8222
truborepipes.com
Trubore Pipes  |  uPVC Plumbing Systems  |  truborepipes.com 4 / 4