SBR Rubber
                     Styrene-butadiene Rubber Sheet (SBR Rubber) is produced by natural rubber sheet blending 
with styrene butadiene. The rubber has excellent mechanical properties, low compression set 
and high resilience. It also has excellent dynamic and rebound properties.  
It is available in a wide range of hardness from 30 to 90 shore A.  
It has good resistance to acids, alkalis and salts. SBR rubber is not recommended for use in 
area where it could come in contact with oils and hydrocarbons. 
 
Application: 
SBR rubber sheets are used as skit board sheets, bride bearing pads, shot plasting sheets, high 
tensile tangum sheets, commercial sheet with or without cotton/nylon insertion etc. Has 
excellent oil resistance. 
STANDARD 
Basic Properties: Durometer Hardness Tens. Stren. Ultimate Elongation Tear 
 Standard:  ASTM D2240  ASTM D412 ASTM D412  ASTM D624 Die C 
 
Durometer Ultimate 
Elastomer Tens. Stren. Specific Gravity  Colour 
Hardness Elongation 
 SBR  Shore A+/-5  Mpa  % Min  g/cm3   
SBR1 65° 3 150 1.4   
SBR2 70° 2.5 130 1.5   
SBR3 50° 5 300 1.40 Red 
SBR4 65° 5 220 1.60 White 
SBR5 65° 5 220 1.60 Black 
SBR6 70° 4 300 1.55 Black 
SBR7 70° 4 200 1.46 Black 
SBR8 50° 8.5 400 1.18 Black 
SBR9 65° 4 200 1.49 Black  
SBR10 80° 4 200 1.44 Black  
SBR11 90° 4 150 1.44 Black 
COMMERCIAL GRADE SBR RUBBER SHEET 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Durometer Ultimate 
Elastomer Tens. Stren. Specific Gravity Colour 
Hardness Elongation 
 SBR  Shore A+/-5  Mpa  % Min  g/cm3   
SBR12 50° 6 500 1.30 White 
SBR13 65° 10 600 1.30 White 
SBR14 45° 12 550 1.27 White 
FOOD GRADE SBR RUBBER SHEET 
 
 
 
 
 
 
Standard Grade Rubber Sheeting