What Is a Wire Rope Clip and What Kind Is It
                     What Is a Wire Rope 
Clip and What Kind Is 
It?
 The wire rope clip is a highly adaptable mechanical 
device that can be used to support and move objects or 
loads. It is critical to have a thorough understanding of 
the rigging components used to attach and lift loads, 
whether in cranes or other lifting applications.
 As a wire rope clamp manufacturer, it is necessary for 
me to inform you about the various types of wire rope 
end terminations. This article will explain what a wire 
rope clip is and the different types of wire rope clamps.
What Exactly is a Wire Rope Clip?
 Wire rope clips can be used to create a load-bearing loop at the 
end of a cable or wire rope, or to connect two cables using a lap 
joint. Wire rope clips are popular because they can be installed in 
the field and provide 80-90% rope breaking strength efficiency, 
depending on the diameter of the wire rope.
Wire Rope Clamps Can Be Used In The 
Following Situations:
 The end of a wire rope attached to a crane cable or winch.
 A rope section threaded through the ring bolt or shackle
 Docks, parking lots, and so on have peripheral cables.
Wire Rope Clamp Types
 Wire rope clamps are classified into two types: U-
Bolt and Double Saddle Clamps. The most common 
are u-bolt wire rope clamps, which can be made of 
forged or malleable metal.
 Rope Clamps with U-Bolts
This wire rope clamp consists of a U-bolt, two nuts, and a metal base 
(saddle) made of forged or cast iron. The installation of the U-bolt type 
rope clamp requires careful thought and attention.
 Clamps for Forged Wire Rope
The wire rope clamp’s base is made of forged steel. Forged clamps are 
heated and hammered to form, resulting in a consistent grain structure 
in the steel. Winch lines, crane lifting lines, support lines, pulling ropes, 
traction lines, lanyards, scaffolding, and other critical heavy overhead 
loads are secured with forged wire rope clamps.
 Clamps for Malleable Wire Rope
Malleable wire rope clips are only used to make loop eye terminal assemblies with the 
correct conventional twist pitch wire rope and are only used in lighter applications 
with lower loads, such as handrails, fences, and guardrails. Wire rope clip bases are 
made of malleable cast iron, which can fracture under heavy use and lacks the 
desirable metallic properties of steel as well as the beneficial grain structure of forged 
bases.
 Clamps for Double Saddle Rope
Double saddle rope clamps are made up of two saddles and two nuts, each with one 
leg and two nuts at the top and bottom. When applied to both the charged and dead 
ends of a wire rope, double saddle wire rope clamps can be used in either direction, 
removing the guesswork from the installation process.
Conclusion:-
 If you want to learn more about screw turnbuckle, shackle, and hook, please 
visit Roma Enterprise, where we provide high-quality products.
Find us on:
WWW.ROMAENT.COM