What you should know before opting for Sliding Glass Door Repairs Melbourne?
                     What you should know 
before opting for sliding 
Glass Door Repairs 
Melbourne?
https://www.slideasydoors.com.au
Sliding glass doors, known for 
allowing soothing beams of light into 
the house, are a lovely addition to 
many homes. Sliding glass doors can 
offer convenient outdoor access to 
the warm Florida air, whether you 
have a patio, balcony, or porch. The 
doors sometimes require slight 
maintenance or removal, as with any 
welcome addition. We assembled a 
list of some of the most common 
sliding glass door issues to support 
homeowners.
In this regard, make sure that you 
properly figure out whether you really 
need a 
Glass Door Repairs Melbourne. In 
most scenarios, you can take care of 
the malfunction on your own.
The Track is Bent
The slipping of your glass door is caused by a bent track. They will pinch the roller to stop the door from closing 
if the tracks are twisted inwards. You can unintentionally take the door right off the track if the tracks are bent 
outward. Using a pair of sturdy pliers to turn the track back into position for an inward curve. Get a rubber 
mallet and a little piece of wood if the tracks are bent out. Place the wood block against the bent track, and 
hammer the track back into place carefully.
Filthy Rollers 
The rollers are the part of the door’s bottom portion that helps it to slide down the track quickly. The rollers 
might just be filthy, which can make it very hard to slide the door open and closed. Tie the thin crevice tool to 
your cleaner if the rollers are dusty and use it to clear any significant debris. Take a wet paper towel after 
vacuuming and wipe away some of the dirt that was left.
Adjustment required for Wheels 
If your sliding glass door’s rollers are out of the track, the whole door will jump off the track. You would need to 
change the bottom screws holding the roller wheels in place to fix this problem. Switch the screws clockwise in 
order to raise the handle. Switch the screws counter clockwise in order to lower the door. Be sure to change 
both sides of the sliding glass door for an equal shift.
Rusted or totally destroyed rollers 
Unscrew the roller and take it to the nearest hardware shop to buy a new roller. Or else, you can simply opt for 
the sliding glass door replacement. Re-mount the sliding glass door and change the wheels to the proper height. 
Then, you can attach the new roller. You can choose Slide Easy Doors for state-of-the-art 
glass door repairs Melbourne.
Contact Us
SLIDEASY GLASS DOOR REPAIRS
Track and wheel replacements servicing Melbourne since 1975.
Address: 11 Wildwood Ct, Albanvale VIC 3021, Australia
(03) 9366 9749
[email protected]
https://www.slideasydoors.com.au
hank
 
T
You