How are Colored Epoxy Flakes Applied
                     How are Colored 
Epoxy Flakes 
Applied? 
Give your floor a new look. Take 
it to the next level by sprinkling 
colored epoxy flakes. Get it done 
from the 
epoxy flooring contractors in Mel
bourne
. 
Apply A Primer or a Base Coat of 
100% Solids   
If the prepared floor is highly porous or if it shows a 
surface defect, you must consider applying a pure 
primer coat before the first broadcast coat. 
How To Spread 
Colored Epoxy 
Chips?  
If you choose to go with ‘
partial broadcast’, your 
goal should be to get a 
good even spread onto 
the floor at the coverage 
that looks good to the 
eyes.  
Partial Broadcast  
In this, the floor will be 
ready for the protective 
topcoat once you remove 
the colored epoxy chips that 
are protruding irregularly.  
Apply A Protective Topcoat  
You can also do an additional topcoat if desired. 
Contact Tuff Build for colored 
epoxy flooring services in Melbourne.  
Full Broadcast  
First remove all the loose chips 
that did not stick to the floor. You 
can also use an electric blower or 
a broom to push them to one 
side of the room then scoop or 
vacuum them up.   
Contact Us 
•5 Lord Place, Point Cook, Vic, 3030, 
Australia 
•[email protected] 
•+61 432 521 274 
•  
•Content Resource:- 
https://tuffbuild.com.au/how-are-colo
red-epoxy-flakes-applied/
 
Thank You