How Long Does Epoxy Coating Take to Cure
                        WELCOME
  TO
How Long 
Does Epoxy 
Coating Take 
 to Cure?
Out of many queries, this is the most widely asked by the clients – What is the Epoxy Cure Time?
Well, such questions are usually asked to the epoxy flooring contractors in Melbourne. But you 
may not get what  you are looking forward to. The simple and straight forward answer to this 
question is seven days. It means that it  takes a week for the final epoxy coating to completely 
get harden. But if we talk about the drying of the epoxy coat,  it usually happens overnight. Yet 
again this is not the case with all epoxy coatings. For instance, if you are using  water-based epoxy 
or solvent-borne epoxy (the stuff smells strong), and you could even have a higher or lower  
percentage of solids. It can take longer to dry. Since the epoxy cure time is of seven days, there 
can certainly be some  variations. Like your floor may get dry enough to walk on it immediately 
after 12-hours or so and may also get ready  for light uses after 24 hours. But wait, this time 
frame is not applicable to all the places. For example, the colder and  less humid an environment, 
the longer will the process of epoxy coating the floor. At a temperature of 25 degrees  Celsius 
and 60 per cent humidity, you may be able to keep back the furniture and other items back onto 
the floor in  two or three days.
Above was the case with the epoxy flooring coating inside the residential or commercial building. 
If the epoxy floor  work takes place outdoors, the time will have to be planned as per the weather 
conditions. Then your floors would  require consecutive days of fine weather to dry up quickly. In 
case, rain is predicted, or any other untoward weather  conditions seem to take place, be patient 
because your epoxy flooring contractor
Type of Product Affects 
Epoxy  Curing Time
The type of product your epoxy flooring contractor in 
Melbourne
use will also affect the curing time.
Many people also believe that if you maximize 
ventilation, the epoxy  floor coating will dry fast. But 
again, this may not hold true in all  circumstances.
You may end up creating a humid environment instead.
There are epoxies which are ‘moisture-cured,’ which 
means they  would require moisture and heat to 
harden and dry up.
This is the major reason- In the places which have hotter 
climate, the  epoxy floor coatings can be applied in the 
day time in which the  concrete cools down around mid-
afternoon. If epoxy is coated to the  concrete which is 
warming, it can cause a lot of issues.
Here’s How You Can Speed 
Up the  Epoxy Curing 
Process
Based on the epoxy product your epoxy flooring 
contractor uses, you  will be able to speed up the drying 
time- either by creating a humid, or  warm environment, 
as already explained above.
There are epoxy products that dry really fast. Such 
products are  expensive and also require significant 
number of people to control  the epoxy application 
process.
Such fast-drying epoxies are made for the areas that 
receive heavy  traffic, or cold areas where fridges are 
kept; commercial kitchens or  the businesses that 
cannot bear any financial loss.
The speedy drying of epoxy sounds good but you can 
even end up  serious issues later on. For example, if you 
had a sub-standard  concrete slab and on the day of 
pouring concrete, if it turns out to be  cold, the working 
time with the concrete may increase.
In the worst-case scenario, a fast-drying epoxy-based 
product will not  be able to build a grip on the surface 
because it would need slower  processing time.
Components of Epoxy
Most epoxies are made of two 
components:  Part A (resin) and
Part B (hardener)
The two components should be linked with each other 
and must be  concrete so as to build a bond.
If the quality of concrete is compromised, and fast-drying 
product is  also used, the results will get affected. Within 
months, the coating will  tear off and you may have to do 
it.
Haste Makes Waste – Abide by this rule because if you 
really do not  need the floor so urgent, then let the epoxy 
coating process go  naturally.
If you wait, chances are extra time will be worthwhile.
If you are deciding to get the epoxy floor done, it is 
advised to check  the products with a critical eye. Here's 
one truth, you may not get any  reply from your epoxy 
flooring contractor. But if you take services  from one of 
the best epoxy flooring contractors that is Tuff Build,  
your every doubt and query will be answered.
Time You Need to Wait for New 
Concrete?
Normally, the concrete slab requires at least 28-days 
before coating.  Even almost after a month, the moisture 
will be tested to ensure that  the concrete is ready for 
coating.
This rule is general, but rest of the variables will be 
played with like;  The thickness of concrete
Curing conditions
Components used in the concrete
The type of coating to be used on the concrete
Who’s the Main Culprit?
Moisture is main culprit. This is what the experts would 
want right  out of the slab.
Slabs may have excess moisture for multiple reasons. A 
moisture  vapor treatment or barrier can also be applied 
to counteract it. This  treatment prevents moisture from 
rising within the slab. Also, it can  withstand huge 
amounts of water pressure.
If your concrete slab gets a coating that completely 
seals the  surface, the water pressure (also called 
hydrostatic pressure) may  build up and rip through 
epoxy coat.
Investing in moisture treatment is crucial. In reality, 
moisture issues  represent less than 5% of the entire 
work. You may even require the  assistance of water 
proofing specialists.
If you are someone who is looking forward to getting 
epoxy floor  installed, contact Tuff Build, the best 
epoxy floor contractors.
Get In Touch
5 Lord Place, Point Cook, Vic, 3030
+61 432 521 274
[email protected]
Content Resource:
htt
ps://tuffbuild.blogspot.com/2021/12/how-long-does-epoxy-coating-take
-to- 
 cure.html