Ways To Give Your Epoxy Floor a Fresh Look
                        WELCOME
 TO
Ways To Give 
Your  Epoxy Floor 
a Fresh  Look
A clean and a shiny floor has a tendency to turn heads. But if your house has 
an epoxy flooring  solution, then the beauty enhances manifold.
Getting an epoxy coating on the floor always turns out to be the best 
decision because of the  benefits it provides like durability, shiny finish, easy 
maintenance that too at a low cost.
Once installed at residential or commercial place, the owners live stress-free 
because these are  long-lasting and there is nothing that will wear and tear till 
years to come. But this does not mean  that you will live care free and will stop 
looking after your floor.
When you contact the best epoxy flooring contractors in Melbourne, you get to 
invest in the  proper floor maintenance. It is the one-time investment but pays 
for the life-time. Epoxy floors do  not only look great, but also saves money. Out 
of all, the major advantage is that you can clean the  epoxy floors at home 
without any professional assistance, unless quite necessary and the  condition of 
the floor demands.
If you have an epoxy floor either at your office or at your home, here are 
some of the steps you  must follow to keep your floors new and lustrous. 
Before that, let us learn about epoxy floors.
Characteristics of Epoxy Floors
Epoxy coatings are used in industrial places because of its 
qualities like  chemical resistance, durability, low porosity 
and strong bond strength.
An Epoxy coating consists of two things: a base and a 
curing agent.
Now let us know about taking care of the epoxy floor i.e., 
giving an epoxy  floor a fresh, new look yet again.
Prevents Damage
Epoxy floors are scratch and stain resistant. These make a 
great option  both aesthetically and financially for the places 
that get high traffic. But  great features and characteristics 
of epoxy floors do not make them  indestructible. Anything 
out of control can get damaged. So, a few  precautions can 
go a long way in ensuring epoxy floors look and perform  the 
best.
A little Effort Will Go a Long  Way in  
Protecting Epoxy Floor
Let me explain this with an example. Keeping a small cardboard box, a 
computer  mouse pad, or a piece of thick foam under your bicycle or 
motorcycle kickstand will  make a huge difference. It will prevent any 
scratches that the floor may get with the  parking of heavy vehicles. 
Initially it may not affect the floor. But if the two-wheeler  is parked 
daily at a same place without placing any cloth, then the epoxy on the 
floor  will get affected.
If you lift heavy loads using rolling jacks, make sure you place 
plywood under the  jack stand which will act as a shock absorber.
Epoxy floors are resistant to scratches, but prevention is always 
better than a cure  especially when it contains a huge involvement of 
finances.
Regular Cleaning Is a Must
Regardless of the place you have your epoxy floor, cleaning is 
necessary. Whether  you have epoxy flooring for your basement, 
porch, or garage, routine cleaning and  maintenance is required. It will 
help in keeping your floor new and shiny all year  round. Not only 
this, it will also ease the burden when it is time for heavy or annual  
cleanings.
For instance, for vehicle drippings or minor spills, simply wipe the area 
with a soft  cloth using water. If you think the spill will leave a stain 
behind, use a little detergent  and clean it but do not keep it on the 
floor for many days. You can also use a  commercial dust mop or soft 
bristle broom to clean it regularly.
Remove Stubborn and Tough Stains
When you see a spillover, treat it immediately. The stubborn spills 
should be said  good bye. If left unattended for days, the floor gets 
a stain which later on gets  difficult to remove.
For example, when you deal with spillages like engine oil, a simple water and 
ammonia  solution will be enough in removing the stain.
Use this simple mixture and get rid of stains without damaging your 
epoxy floor.  Follow the steps like, sweep away the dust and debris 
from the area. Mix five ounces  of ammonia for every gallon of water. 
Then scrub the stained area using a hard-  foamed mop which has been 
soaked in the solution of water and ammonia.
More tough stains like rust may also require additional scrubbing 
with a kitchen  scrubbing pad.
TIP- Be sure not to use anything too rough on the epoxy surface like steel wool. 
This will  damage the floor further and dull its shine.
Also avoid acids, chemicals, or abrasive cleaners as these can also 
lead to cloudy or  damaged floors.
If you still cannot decide on which solution to use to clean the epoxy 
floors, contact  the best epoxy flooring contractors in Melbourne. The 
professionals will guide and  inform you about the process.
Maintain the Epoxy Shine
Epoxy flooring looks glossy and shiny when thy are new.But 
the shine  may fade and fog may arrive over time. So, to 
prevent any such thing to  happen, clean the entire floor at 
least once a year and help in  maintaining its shine.
How to do?  
You can do this by hosing the whole floor with hot 
water and a  squeegee. The main idea is to remove 
any residue or cloudiness  which can potentially dull 
the surface of the floor.
Epoxy and Its Formation
Epoxy floors are formed by applying layers of a mixture of resins 
and  hardeners.
The materials used are highly resistant to degradation.
These form a solid adhesive bond with base materials like 
concrete.  The materials used become more robust and durable.
Everything squeezes to just one thing and that is deep cleaning 
once a  while or regular cleaning. There is no other formula that 
you can use to  keep your epoxy floors protected, safe, and 
appealing at the same time.
How To Fix Yellow Resin?
To clean the yellow tint, you can use a UV stabilizing 
agent to epoxy  resin formulas. This will mitigate the 
yellow effect from the floor. UV  stabilizers are quite 
effective in preventing gloss loss, de-lamination,  
chalking, and cracking. But the coloration is merely 
delayed.
If you fix this yellow coloration that comes with long time 
span, the  epoxy floor will look new and pristine. But for 
that too, you will have to  take care of the cleaning and do 
it regularly without missing.
Conclusion
Protection is important apart from cleaning because it will only keep the floor 
fresh. But when  you make little extra effort, you can prevent the floor from 
getting scratches and tough marks.  Scratches are hard to remove so, it is 
advised to take precautions if the floor comes in a lot of  use. Also, if the floor 
gets heavy traffic, then also extra precautions will be needed. In order to  
retain all the advantages, it is important to understand the epoxy floors 
features and  characteristics.
Get In Touch
5 Lord Place, Point Cook, Vic, 3030
+61 432 521 274
[email protected]
Content Resource:
htt
ps://tuffbuild.blogspot.com/2021/11/ways-to-give-your-epoxy-floor-fresh-look.
html