Get Your Purging Compounds Free Sample from UNICLEANPLUS
                     Is Your Purge Compound Compatible With All 
Resins?
Quick answer: not always. Purging Materials are made to work with many resins, but 
chemical and thermal differences matter. A short trial helps avoid surprises.
Why Compatibility Can Fail
Different resins react to heat and cleaners in different 
ways. Some engineering plastics need higher melt 
temps. Some colourants or glass fillers create 
stubborn residues. If a Purging Compound is not 
suited, it may not remove degraded polymer or it may 
leave residues of its own. This causes streaks, black 
specks, or poor surface finish. Key compatibility facts 
and run ranges should be checked before full use.
What to Watch for — Common Material 
Risks
 Thermal mismatch: if the purge degrades at the resin’s processing temp, it will 
not clean well.
 Pigment residues: dark pigments and carbon deposits need a stronger action.
 Filled resins: glass, talc or flame retardants can trap residues in dead zones.
 Clear/transparent parts: any purge residue shows easily here — choose 
food/clear-safe options.
UNICLEANPLUS notes processing ranges and grade guidance so users can match purge to 
resin family.
Trial Before Scaling up — Why It Matters
Want to avoid costly scrap? Run a short trial on the machine. Start with a free test batch and 
check: how fast old colour clears, if black specks disappear, amount of purge used, and any 
residue left behind. UNICLEANPLUS offers a Purging Compounds Free Sample program so 
shops can do this exact test on their lines before buying bulk.
How Suppliers Like UNICLEANPLUS Support Grade-
sUpNIeCcLiEfiAcN PTLrUiaS ls provides 
pellet grades (UC’A / UC’C) 
and a liquid emulsion grade 
(UC’L). The liquid grade can 
be mixed into running resin 
(approx 2–10%) for tough 
contamination and works 
across a wide temp range 
(~160–420 °C). This lets 
teams test small amounts, 
see real results, then scale 
safely. Their documentation 
also gives step-by-step 
purge procedures for 
injection, extrusion and hot-
runner touch-ups.
Simple Trial Checklist for Plant Teams
1. Record current resin, temp, and screw speed.
2. Ask for a Purging Compounds Free Sample that matches your process.
3. Follow the supplier’s purge procedure (mix % for liquids, feed volumes for pellets).
4. Run short shots and inspect parts for streaks or specks.
5. Note purge quantity used and time to clear — this decides cost and ROI.
6. If results ok, plan a larger trial run before full purchase.
Final Note — Practical Rule of Thumb
Always test. A sample run proves compatibility, saves resin and avoids scrap. 
UNICLEANPLUS lets plants trial grades with technical support so the choice is data-driven, 
not a guess. Request a Purging Compounds Free Sample and run it on the actual machine to 
see the fit.
To Read Our Published Blog:
purgingmaterial.blogspot.com/2025/09/is-your-purging-compound-suitable-for-every-resins.html
https://unicleanplus.mystrikingly.com/blog/is-your-purging-compound-universal-for-all-resins
https://unicleanplus.weebly.com/blog/is-your-purging-compound-perform-well-with-every-resin
https://unicleanplus.livepositively.com/is-your-purging-compound-effective-with-different-resin-types/
https://www.homeexpertsblog.com/is-your-purging-compound-work-with-every-resins/
UNICLEANPLUS™
Address : Bharatipolychem Pvt Ltd, Plot No-
451
City: Lesliganj
State: Jharkhand
Zip: 822118
Country: India
Phone: +91 9021232809
Email: [email protected]
Website: 
https://www.unicleanplus.com/contact/