WPC Plank
                     Step-by-Step Guide to Installing WPC 
Planks Like a Pro
WPC Plank is a durable, stylish, and water-resistant option that’s easy to install. Whether 
you're a DIY enthusiast or tackling your first flooring project, following the right steps will ensure 
a professional-looking result. In this guide, we’ll walk you through the installation process from 
start to finish.
Tools & Materials Needed
✅ WPC planks ✅ Measuring tape ✅ Chalk line ✅ Utility knife or flooring cutter ✅ 
Spacers ✅ Underlayment (if required) ✅ Rubber mallet ✅ Pull bar and tapping block ✅ 
Level ✅ Pencil or marker ✅ Vacuum or broom
Step 1: Prepare the Subfloor
Before installation, ensure the subfloor is clean, dry, and level.
● Remove old flooring if necessary, including carpet, nails, and adhesives.
● Check for uneven surfaces – use a self-leveling compound if needed.
● Vacuum or sweep to remove dust and debris.
● If installing over concrete, consider using a moisture barrier.
Step 2: Acclimate the WPC Planks
WPC planks should be allowed to acclimate to room temperature for 24-48 hours before 
installation.
● Stack planks in the room where they will be installed.
● Maintain an indoor temperature of 60°F – 80°F (16°C – 27°C).
Step 3: Plan Your Layout
● Measure the room and determine the best layout to minimize plank cuts.
● Use a chalk line to establish a straight reference line.
● Stagger the planks in a random or uniform pattern to create a natural look.
Step 4: Install the First Row
● Place spacers along the wall to maintain a ¼-inch expansion gap.
● Lay the first plank with the tongue side facing the wall.
● Connect the next plank using the click-lock system, tapping gently with a rubber mallet 
if needed.
● Continue until the first row is complete, cutting the last plank to fit.
Step 5: Install Subsequent Rows
● Start the second row with a plank at least 6 inches shorter or longer than the first row 
to stagger the seams.
● Insert the tongue of the new plank into the groove of the previous row at an angle and 
press down.
● Use a tapping block and pull bar to secure the planks tightly.
● Repeat until the entire floor is covered.
Step 6: Cut Planks for a Perfect Fit
● Use a utility knife or flooring cutter to trim planks as needed.
● For areas around doorways and corners, use a jigsaw or multi-tool for precise cuts.
Step 7: Finishing Touches
● Remove spacers and install baseboards or trim to cover expansion gaps.
● Use transition strips for doorways and between different flooring types.
● Clean up debris and vacuum the new floor to remove dust.
Step 8: Enjoy Your New Floor!
After installation, allow the floor to settle for a few hours before placing furniture. Avoid wet 
mopping for at least 24 hours to let the planks fully adjust.
By following these steps, you’ll have a stunning, professionally installed WPC floor that 
enhances the look and feel of your space.
Have you installed WPC Plank before? Share your experience in the comments below!